英语释义

• synthetic rubber made by polymerizing isobutylene

片语

pharmaceutical butyl-rubber stoppers药用丁基橡胶瓶塞

butyl l rubber异丁橡胶

butyl chloride rubber氯化丁基橡胶

Butyl rubber isobutyl rubber丁基橡胶

butyl rubber sealant丁基橡胶密封胶

butyl l rubber tape异丁橡胶带

butyl rubber insulated cable丁基橡胶绝缘电缆

butyl rubber stopper丁基胶塞

英汉例句

• the compatibility of mineral oil and butyl rubber was described and the negative effect of mineral oil on insulating glass unit was presented by a set of photograph .

  文中论述了矿物油与丁基胶相溶的原理， 并通过一组照片描述了矿物油对中空玻璃的危害。

• given in the work of hands will inevitably be exposed to uv light oil, so it is best to wear nitrile rubber or butyl rubber gloves.

  由于工作中双手不可避免地会接触到uv上光油，因此最好戴上腈橡胶或丁基橡胶手套。

• butyl rubber which contains about 1% chlorine.

  含约1%氯的丁基橡胶。

• objective:to discuss the necessity of clearing the pharmaceutical butyl rubber stoppers for infusion bottles before use.

  目的：探讨免洗丁基橡胶输液瓶塞使用前是否需要清洗。

• the matching use of the butyl rubber and the polyisobutylene with different molecular weights facilitates the improvement of the strength and workability of the transparent butyl hot-melt sealant.

  本发明采用不同分子量的丁基橡胶及聚异丁烯配合使用，利于提高透明丁基热熔密封胶的强度及施工性能。

• the rubber matrix can be styrene butadiene rubber matrix or butyl rubber matrix.

  其中的橡胶基体可以为丁苯橡 胶基体或丁基橡胶基体。

• butyl rubber closures had replaced of natural rubber closures and had been applied in pharmaceutical packaging.

  丁基胶塞已经逐步取代天然胶塞，在药品包装行业广泛应用。

• methods to summarize the application of butyl rubber in our preparation department in the last three years.

  对三年来我院制剂室丁基胶塞的使用情况进行总结。

• using butyl rubber as the base material, tackifier and some auxiliary additives, the butyl rubber based hot-melt adhesive was prepared for favorable adhesiveness with pp, pc and metals.

  以丁基橡胶为主体材料，加入增粘剂及其它助剂，研制了一种对pp、pc等非金属材料及金属材料皆有很好粘接性能的热熔胶。

• antas-133,138 is a one-component butyl rubber sealant that is designed specially for waterproof.

  安泰-133为单组分丁基橡胶建筑防水密封胶。

• some countermeasures against the problem possibly occurred in the process of the butyl rubber industrial production are presented.

  针对esd在丁基橡胶生产时可能出现的问题，提出了解决方案。

• objective to investigate the effect of butyl rubber stopper on the stability of procaine hydrochloride injection.

  目的研究丁基橡胶塞对普鲁卡因注射液稳定性的影响。

• this article introduces the major manufacturers and the major production methods of butyl rubber and halogenated butyl rubber at home and abroad.

  本文介绍了丁基橡胶和卤化丁基橡胶国内外主要生产厂家及生产方法。

• the tall profile cone surrounds are of butyl rubber to allow greater excursion, and therefore higher output.

  高轮廓的音盆环绕设备采用丁基橡胶以允许更大偏差，因而产生更大输出。

• a one-component contact adhesive based on modified bromoinated butyl rubber for seaming epdm roofing membrane was developed.

  研制了一种单组分三元乙丙防水片材接缝用接触型胶粘剂。

• the present paper has prepared the butyl rubber sealant, and through changes padding to fill in completely studies the sealant each physical performance.

  本论文制备了丁基橡胶密封胶，并通过改变其中的填料的填充量来研究密封胶的各种物理性能。

• according to the status and existed problems in the production of butyl rubber in china, some development suggestions are put forward.

  针对目前我国丁基橡胶生产状况及存在的问题，提出了生产发展的建议。

• obtained by chlorination of butyl rubber in hexane solution.

  由丁基橡胶在己烷溶液中氯化制得。

• the formulation of a hot-melt sealing adhesive for shrinkable materials is presented. the effects of stick agent, filler and butyl rubber on the properties of the adhesive are studied.

  本文提出了一种用于热熔收缩材料的热熔密封胶配方，研究了增粘剂，填料、丁基橡胶对密封胶性能的影响。