gantry crane中文,gantry crane的意思,gantry crane翻译及用法

2026-04-13 07:01 浏览次数 19

gantry crane

英[ˈɡæntri krein]美[ˈɡæntri kren]

龙门起重机

gantry crane 英语释义

英语释义

    1. a bridge crane in which the beam or bridge is carried at each end by a trestle that travels on tracks on the ground

gantry crane 片语

片语

propelled gantry manure crane自走式廄肥高架起重机

gantry y crane门型起重机

gantry container crane集装箱龙门起重机

gantry mast crane门架式桅桿起重机

gantry-crane tower高架起重维护塔

gantry y crane system门式起重机装置

gantry transfer crane门式搬运起重机

gantry grab crane门式抓斗起重机

gantry of crane起重机门架

goliath crane龙门起重机;巨型起重机

gantry crane 例句

英汉例句

  • extensive simulations have shown that fuzzy expert controller has better control performance than classical cascade feedback controller in the gantry crane control.

    仿真结果表明,模糊专家控制器在行车控制中比串联反馈控制器各项控制性能好。

  • the crack limit length of gantry crane metal structures under the work conditions is found through a large number of experiments and theory analyses.

    通过大量的实验和理论分析,找出了龙门起重机在工作状态下金属结构的裂纹限制长度。

  • the paper analyzed and demonstrated the types, basic parameters, working grades of gantry crane and the forms of the new standard of gantry crane in forestry.

    本文对林用门式起重机型式、基本参数和工作级别标準的制订进行了分析和论证。

  • this paper shows influence over a gantry crane from unbalanced moment, especially for its amplituder, and causes and ways to solve it are given as well.

    通过实例说明不平衡力式矩对门式起重机变幅机构的影响,并分析了原因,提出解决的办法。

  • and based on parametric modeling of the modules, a module management method of gantry crane modularizing design is presented.

    在对模块的创建应用了参数化设计的方法基础上,提出了门式起重机模块化设计的模块管理方法。

  • resorting to a simplified mechanical model, this paper makes a theoretical analysis of the dynamic response of the gantry crane and loading bridge when their their trolleys collide with buffers.

    本文用简化的力学模型对龙门起重机和装卸桥小车撞击缓沖器时的动力响应进行理论分析。

  • a new technique is put forward that high-low brace gantry crane wide double guiding girder method to construct bridge.

    本文提出了高低支腿龙门吊宽幅双导梁法这种新的桥梁工程施工方法。

  • the structure of shipbuilding gantry crane has single and double girder types.

    造船龙门起重机结构型式分为单梁和双梁。

  • based on lagrange equations, a dynamic model is derived for typical underactuated mechanical gantry crane system.

    针对龙门吊车这一典型的欠驱动机械系统,采用拉格朗日方程的方法建立了其动力学模型。

  • gantry crane plays an irreplaceable role in producting and handling of large equipments.

    龙门起重机在大型设备的生产和装卸上都起到不可替代的作用。

  • in this article, the development of a gantry crane operator-training simulator, including all the earlier mentioned components, is presented.

    在这篇文章中,一个龙门起重机操作员培训模仿器的开展,包括所有方才提到的组件,提出。

  • finally, it gets frequency band which should be avoided and provides target variables or state variables for the optimum design of gantry crane by the harmonic response analysis for gantry crane.

    通过对龙门起重机进行谐态分析,得出应该避免的固有频率段,并且为龙门起重机的优化设计提供了目标变量或状态变量。

  • finish the design of electricity control system of the gantry crane completely.

    较完整的完成了龙门起重机电气控制系统的设计。

  • the said method can be applied to design calculation of practical engineering structures such as super large bridge crane, track laying machine, bridge erecting machine, gantry crane and …

    文中所述方法与经验可普遍推广应用于超大型桥式起重机、铺轨架桥机、龙门行车与多片式抢修钢桥等实用工程结构物的设计计算。

  • first of all, numerical simulation of two-dimensional rigid main beam cross-section of the single beam gantry crane is carried out with five turbulence models.

    本文首先将单梁龙门起重机主梁二维刚性截面放于五种湍流模型中进行数值模拟。

  • in this paper, the static strength analysis of one gantry crane were accomplished on difference working conditions by the ansys;

    利用大型有限元软件ansys对某龙门式起重机进行整机多工况静强度分析;

  • many times i worked with technicians from japan, even more than 60 years old, they would climb a gantry crane of 18 meters high, more than 20 times a day.

    我曾有过很多次与日本服务工程师共事的机会,尽管他们60多岁了,却依然爬着高达18米的龙门吊,每天上下不止20次。

  • the main beam is the main hoist gantry crane force components, main beam directly affects the service life of machine.

    主梁是葫芦门式起重机的主要受力部件,主梁的质量直接影响到整机的使用寿命。

  • shipbuilding gantry crane a kind of gantry cranes of large lifting capacity, mare ultifunctions, and high efficiency which is dedicated for large hull staging, butt and flip operations in docks.

    造船门式起重机是一种大起重量、大跨度、多功能、高效率的门式起重机械,专用于船坞(或船台)进行大型船体分段运输,对接及翻转作业。

  • this paper expounds the feasibility of adopting high-voltage power supply for gantry crane from the angles including design, construction, cost and energy saving, etc.

    从龙门吊如采用高压供电出发,重点在设计、施工、造价、节能方面加以阐述。

  • the variant design platform of sluice gate gantry crane was developed, and as an example, methods were applied and verified.

    以开发的门式启闭机变型设计平台为例,对提出的方法进行了验证。

  • the said method can be applied to design calculation of practical engineering structures such as super large bridge crane, track laying machine, bridge erecting machine, gantry crane and eme…

    文中所述方法与经验可普遍推广应用于超大型桥式起重机、铺轨架桥机、龙门行车与多片式抢修钢桥等实用工程结构物的设计计算。

  • the mooring support structure was transported to dns and pre-installed on forecastle deck of the fpso by a gantry crane at dry dock.

    系泊支架是运到大连造船新厂后,用船坞龙门吊吊装在浮式生产储油装置的艏楼甲板上;

相关热词