英汉例句

• parting surface was designed in terms of the shape, dimension of the parts and requirements of gating system and die-released.

  根据压铸件的形状、尺寸，以及浇注系统和脱模等要求，设计分型面。

• whether the design of gating system and process parameters is reasonable or not, they decide the quality of a casting in a great extent.

  铸件浇注系统和工艺参数的设计是否合理在很大程度上决定了铸件的质量。

• in design part, a method of calculating the gating system parameters is achieved.

  设计计算部分对铸钢件浇注系统设计中涉及到的重要参数提供了计算方法。

• based on a review of literatures and regression analysis of the experimental data, a new algorithm for gating system design has been developed.

  在总结有关文献资料和大量试验结果与统计回归分析的基础上，提出了一种新的浇注系统设计计算方法。

• meanwhile, the gating system of the casting was optimized to provide a reference for improving the technology by applying the software.

  同时，应用该软件对铸件的浇注系统进行了工艺优化，为工厂进行工艺的改进和优化提供了科学依据。

• in this paper, by means of the high-speed photograph and micro-computer data processing the pressure state in gating system has been studied in the light of principle of the hydraulics simulation.

  用水力学模拟的方法借助于高速摄影及微机数据处理技术，对浇注系统内的压力状态进行了研究，获得浇注系统产生负压的临界条件，并对其影响因素作了初步分析。

• according to the disa technical design standard and our experience, we use chocked-unchocked gating system to design the complex structure and high-strength technical system of qd90 cylinder block.

  参照disa工艺设计标準并结合公司以往经验，使用封闭一开放式浇注系统设计出结构复杂、高强度的qd90缸座铸件的工艺系统。

• according to the structure of plastic parts and mold characteristics, the flow model of the plastic melt in the gating system based on the ansys was built and simulated.

  根据塑件结构及其模具特点，基于ansys软件，建立并模拟了塑料熔体在浇注系统中的流动模型。

• this paper introduces the performance characteristics of the mcu p87lpc764 as well as the design and realization of an intelligent gating system with this mcu as its heart.

  介绍了p87lpc764单片机性能特点及以该单片机为核心的智能化门禁系统的设计与实现。

• the flow patterns resulted from different types of gating system are analyzed and compared also.

  并针对实例，分析和比较了不同形式浇注系统所引起的流动模式。

• the gating system of this casting is far from being complicated.

  这个铸件的浇注系统一点也不复杂。

• the gating system for mg alloy die casting was optimized through computer numerical simulation to ensure effectively t…

  利用计算机数值模拟工具进行镁合金压铸件浇注系统优化设计，可以有效保证设计质量。

• the newly developed method of gating system design for zinc alloy in die casting is introduced.

  介绍了锌合金压铸浇注系统设计的最新方法。

• the design is improved by using a continuous double tangential tapered gating system and a bigger size runner. the gate area is increased and the gating speed is slightly reduced.

  优化设计中采用连续的锥形双切向浇注系统和较大的浇口尺寸，使浇注面积增加，浇注速度略微降低。

• in this paper, water has been used to simulate the bottom-sides gating system of the large hydro-turbine blades by means of high-speed and continuous photographic techniques.

  采用高速摄影、连续拍照等技术手段，对大型水轮机叶片底侧式浇注系统的充型过程进行了水力模拟研究。

• in this paper, based on the structure of cylinder block, the gating system and overflow well are designed.

  本文首先根据缸体结构特征，设计了浇注系统和溢流系统；

• it's very important to design the gating system reasonably, to accurately controll the pouring temperature and the ceramic shell temperature.

  合理设计浇注系统、严格控制浇注温度及模壳的温度至关重要。

• compared with traditional counter gravity casting technique, the technique combining with appropriate gating system makes great contributions to the enhancement of mechanical property of castings.

  相比传统的反重力铸造技术，该技术配合合适的浇注系统对铸件性能有明显的改善作用。

• based on analogic theory, hydraulic model was founded to choose the optimum gating system for prevention from casting defects including gas hole and misrun.

  水力模拟依据相似理论，建立水力模型，选出最佳浇注系统，防止吸气、浇不足等缺陷；

• the foundry method scheme, gating system design, melting and treatment of the molten iron was described.

  对铸件的工艺难点进行了分析，介绍铸造工艺方案，浇注系统设计，和铁液熔炼、处理工艺。