片语

gear segment tooth扇形齿轮轮齿

gear-tooth vernier齿距卡规

gear breaking tooth齿轮断齿

gear-tooth vernier caliper齿轮游标卡尺

gear-tooth forming轮齿成形

gear-tooth strength轮齿强度

gear with tooth correction修正齿形的齿轮

face of gear of tooth齿面

英汉例句

• and it analyzed that hob tooth height and tooth top pour round radius impacted on gear tooth root crooked stress.

  分析了滚刀齿高和齿顶倒圆半径对所切齿轮齿根弯曲应力的影响。

• based on the theories of digital conjugate surface and gear meshing, a method for machining digital gear tooth surfaces(dgts) was proposed.

  利用共轭曲面原理和齿轮啮合原理对以离散点表达的二维数字化齿面的展成加工进行了研究。

• bevel gear tooth broken happens frequently in practical using.

  伞齿轮在使用过程中常有断齿现象发生。

• present paper has probed into the influences of sevei-al typical profile modification of gear tooth on instantaneous transmitting errot and gaer noise.

  本文对几种典型的齿轮齿形曲线修整对瞬时传动比和噪声的影响进行了探讨。

• a mathematical model of spiral bevel gear tooth surface was built by analyzing manufacture method and meshing theory.

  通过分析锥齿轮的加工方法和齿轮啮合理论，建立了螺旋锥齿轮齿面数学模型。

• it explains reasons of the peeling off and breakage of gear tooth in extruders reducer, recomends the processing method of increasing gear strength, and analyses the mechanism of strength increased.

  指出了挤泥机减速机齿面剥落和断齿的原因，提出了提高齿轮强度的加工方法，分析讨论了强度提高的机理。

• the phenomenon of drive gear tooth fracture is the most common occurance damage forms in mechanical driving equipment.

  传动齿轮轮齿断裂现象，在机械传动设备中是一种最为常见的齿轮损伤形式。

• the solid model of gear tooth profiles can be modified by adjusting the factors of conjugate motion and generation flank.

  它可以使实体齿廓形状通过调整共轭运动和产形面的参数进行修正。

• gear tooth face serious wear new gear should be changed, if only gear at both ends of the plane wear, can be in surface grinding machine on grinding repair light.

  齿轮齿面严重磨损时应更换新齿轮，如果只是齿轮的两端平面磨损，可在平面磨床上磨削修光。

• in this paper, a. new algorithm substituting an optimized round arc for the outline of tooth curve of an epicyclic gear tooth with long amplitude is discussed.

  本文提出了用最优化圆弧代替长幅外摆线轮齿廓曲线的一种新型算法。

• the common gear tooth profile curve launches after neighborhood higher order step taylor's series, can discover the tooth face meshing point neighborhood gap is 2 step infinitely greats.

  一般齿轮齿形曲线在一点邻域的高阶阶戴劳级数展开后，会发现齿面啮合点邻域间隙为2阶无穷小。

• in this paper we introduce to the meshed experiment step on involute gear tooth profile by caxa- 97 software and set up a method of gear cutting tool in the experiment of meshing and cutting gear.

  本文介绍了用微机和caxa-97软件进行渐开线齿轮范成实验的步骤和范成实验时齿轮插刀设置方法。

• the cepstrumalgorithmis led-in the order analysis, and the gear tooth crack fault is diagnosed by order cepstrum successfully.

  将倒频分析引入阶次分析中，成功的识别了齿根裂纹故障。

• in this paper, the curvilinear equations of pin gear tooth outline are deduced by the differential geometry method, and the software for the dynamic design of pin gear transmission is designed.

  文章采用微分几何的方法建立了销齿轮齿形的曲线方程，设计了销齿轮传动的动态设计软件。

• the main idea of the single gear tooth analysis is that the vibration signals collected with high sampling rate are divided into a number of segments with the same time interval.

  它将振动平均信号等距分段（所分段数与被监测齿轮齿数相等），然后对分段信号进行频谱分析等。

• dynamic speckle photography of the gear tooth has been achieved by combining a pulsed ruby laser with the external synchronizing trigger signal.

  红宝石脉沖激光器和外同步触发信号结合实现了齿轮轮齿动态散斑图的记录。

• the mlx90217 is a self adjusting digital output rotary position gear tooth sensor designed for use in automotive camshaft sensing as well as other speed sensing applications.

  mlx90217是一款自适应调整、数字输出的旋转位置齿轮传感器，可应用于汽车凸轮轴传感器以及其它速度传感器。

• before shaving teeth gear tooth shape of processing with hob called before shaving hob.

  剃齿前加工齿轮齿形用的滚刀称为剃前滚刀。

• gear tooth thickness at the site are unilateral wear, so gear can be rotated 180 degrees to use.

  齿轮在齿厚部位都是单侧磨损，所以可将齿轮翻转180度使用。

• this paper proposes a new method to modify the cycloid gear tooth of reducer in order to improve the gear engagement.

  本文以改善摆线针轮减速器轮齿啮合质量为目的，提出了一种新颖的摆线轮齿形修整方式。

• the research about digital gear tooth surfaces is becoming an important developing aspect for contemporary design & manufacture.

  有关数字化齿面的研究已成为现代机械设计及制造的一个重要发展方向。

• however, after shaved by shaving cutter with true involute profiles, there are the 「mid-concave」 phenomena on the pitch points of shaved gear tooth profiles inevitably.

  然而用标準渐开线齿形剃齿刀剃齿后，在工件齿形节点附近会出现不同程度的「中凹」现象。

• using present bending fatigue limit data of gear tooth and other materials of gears, the calculating method of re liability is proposed for bending strength of gear tooth st steady condition.

  利用现有齿根弯曲疲劳极限应力数据及其它齿轮资料，提出了稳定工况下齿轮齿根弯曲强度可靠度计算方法。

• the following are the main tasks of the paper:1) the gear tooth stiffness, gear tooth error and meshing shock are calculated after constructing the gear tooth fem model.

  本文的主要研究工作有：①建立齿轮啮合的有限元模型，计算轮齿啮合的刚度激励、误差激励和啮合沖击激励；

• depending on the sensor model the number of pulses resulting from each gear tooth may be 2 to 16, with the nature of the realtime processing ensuring that this occurs from the first tooth sensed.

  根据速度传感器的型号，每一个轮齿产生的脉沖数可以是2-16，并通过实时处理的特征，确保这一脉沖从第一个轮齿开始旋转时就能感应到。

• however, the research on the bending strength of large module gear tooth root is scarce until now.

  但是，目前对大模数齿轮弯曲强度的研究还比较少，因此研究大模数齿轮轮齿弯曲强度具有重要意义。