英语释义

• a toothed wheel that engages another toothed mechanism in order to change the speed or direction of transmitted motion

片语

tooth wheel齿轮

gear gear wheel齿轮

turning gear hand wheel盘车手轮

Small gear-wheel梳齿状小圆轮

gear end wheel机头轮

planet gear planet wheel行星齿轮

sprocket gear chain wheel链轮

Pump gear-wheel齿轮抽水机

change gear change wheel变速齿轮

miter gear mitre wheel等径伞齿轮

cog wheel[机] 齿轮

英汉例句

• the gear rim , gear wheel and screw pole screw pairs of open-close draw stem drive the right and left valve body to clamp and release.

  启闭推桿通过齿圈、齿轮和丝桿螺旋副驱动左、右阀体完成松开、夹紧动作。

• spinner mainly consisted by cabinet, wedge-shaped sheath, friction wheel, air tube clutch , gear wheel 1, gear wheel 2, gear shaft , motor pinion, air motor and other parts.

  旋扣器主要有箱体、楔形套、摩擦轮、气胎离合器、轴出轴套、大齿轮1、大齿轮2、齿轮轴、马达小齿轮、气马达、继气器、箱体底盖、等组成。

• this article commented on the draft of standard for the specified harden ability steel for gear wheel and the contrast and analysis between the same standard in domestic and foreign.

  叙述了保证淬透性齿轮用钢标準制定及国内外同类标準对比分析。

• algorithm and control parameters for the platform were adjusted by the functional test of both the motor powered gear wheel driving and hydro-p.

  通过以电动机为动力的齿轮驱动和全流量清水涡轮驱动的功能试验，对稳定平台的算法和控制参数进行了调试。

• secondly, through to study gear wheel vibration signal analysis course related to wavelet theory that arrives research, explain with various wavelet project meanings and theoretical foundation.

  其次，通过对研究齿轮振动信号分析过程所涉及到的小波理论的研究，阐述了不同小波变换的工程意义和理论基础。

• in the author analyses the average load component of involve planet gear wheel transmission.

  对渐开线行星齿轮传动均载机构进行了分析。

• this paper discusses the application of favorable design in machine parts curricula design by the favorable design of the column gear wheel reducer.

  本文结合圆柱齿轮减速器的优化设计，讨论了优化设计在机械零件课程设计中的应用。

• the experiments of cutting stainless steel gear wheel with fiber laser precision processing system, were carried out.

  利用光纤激光精密加工系统进行了不锈钢齿轮的切割实验。

• this paper illustrates the processing art method of the hard gear wheel with big modulus in accordance with the mill wheel machine equipment in our factory and analyzed the big modulus gear wheel.

  介绍了利用杠桿分析法进行行星齿轮变速机构方案设计的过程及方法，对汽车自动变速器的设计具有一定的指导意义。

• the feederless foundry method for a large ductile iron gear wheel was described.

  介绍了大型球铁齿轮的无冒口铸造工艺。

• this text mainly introduces the design of the operation organization of the cylinder gear wheel decelerator .

  本文主要介绍圆柱齿轮减速器的运行机构的设计。

• the gear wheel is driven by a small gear wheel meshed with the gear wheel. the small gear wheel is transmitted by a synchronous motor controlled by a controlling circuit.

  此齿轮由与其啮合的小齿轮驱动，该小齿轮由受控制电路控制的同步电机传动。

• the text uses matlab optimization toolbox for solving the problem of robust optimization design of the gear wheel transmission for the first time, and gives the corresponding algorithm procedures.

  本文首次使用matlab优化工具箱对齿轮传动问题进行稳健优化设计求解，并给出了相应的算法程序。

• it is very extensive that the interior gear wheel is used in industry.

  内齿轮在工业中应用十分广泛，对内啮合齿轮传动的特点进行了分析。

• seal rings, automotive parts, handle grip, gear wheel etc.

  弥缝圈、汽车配件、把儿、齿轮等。

• this paper illustrates the processing art method of the hard gear wheel with big modulus in accordance with the mill wheel machine equipment in our factory and analyzed the big modulus gear wheel.

  针对我厂现有磨齿机的设备和对特大模数齿轮参数分析制定出特大模数硬齿轮加工工艺方法。

• the first gear wheel (5) can be transferred into a switched-on state, where the first gear wheel (5) is connected to the first shaft (2) in a rotationally fixed manner.

  第一齿轮（5）能转变到接合的状态，在该接合的状态下第一齿轮（5）与第一轴（2）抗旋转地相连接。

• according to the experience formula, the axle of the gear wheel has been used in the design of mechanical construction.

  根据经验公式计算，在齿轮传动链的设计中齿轮需要采用齿轮轴的形式。

• it adopts special gear wheel four drive.

  采用特制齿轮四驱动；

• one end of the shaft is provided with a gear wheel which is externally engaged with a gear wheel on a seeding unit, so that the stirring wheel is reversely rotated following the seeding unit.

  在轴的一端安装齿轮，通过与安装在排种器上的齿轮外啮合，使搅拌轮随排种器反向转动。

• a gear wheel lock mechanism is also provided to prevent the wheel spindle from rotating during installation or removal of a grinding wheel on the wheel spindle.

  还设置有一种齿轮锁机构，以在轮盘主轴上的研磨轮安装或去除过程中防止轮盘主轴转动。

• innovation: normally it is run by the variation of gear wheel speed, 30-50 kilometers per hour. it has two functions after folded.

  创新性：正常行走是靠齿轮变速，时速30至50公里，折叠后有两项功能。

• the edges of all steel components are beveled and polished, and each tooth of each gear wheel is manually polished with a rotating hardwood disk to reduce friction at the wheel contact points.

  所有的不锈钢部件边缘都被倒角抛光，并且每一个齿轮的齿都被硬木转盘手工旋转抛光以减小齿轮接触点间的摩擦。