片语

simplified hydraulic calculation简化水力计算

simplified calculation equation简化计算式

simplified calculation method简化计算法

simplified calculation model简化计算模型

simplified dynamic calculation简化动力计算

simplified d calculation简化计算

simplified design calculation设计简化

For Further Simplified Calculation为进一步简化计算

simplified calculation program简化计算程序

simplified calculation methods简化计算方法

英汉例句

• the simplified calculation method of section temperature field for concrete columns with steel tubes under fire disaster conditions was studied for convenient practice.

  为方便实用，研究了火灾下钢管混凝土柱截面温度场的简化计算方法。

• in this paper, a simplified calculation model has been proposed for analyzing the dynamic characteristics of tube in tube structure.

  本文为高层建筑筒体结构动力特性分析提供了一个简化计算模型。

• this paper discusses the method of defining size tolerance in the working procedure, makes use of craft technique to define tolerance and raises the simplified calculation of craft technique.

  论述工序尺寸公差的确定方法及利用工艺能力确定工序尺寸公差，给出工艺能力的简化计算方法。

• in the paper, the features and varieties of eccentrically braced frames are concluded. a kind of simplified calculation method is put forward, which could be used at the preliminary design stage.

  介绍了偏心支撑框架的种类和受力特点，提出了偏心支撑体系的一种简化计算方法。

• then, variance estimates of single imputation, simplified calculation of multiple imputation and imputation using response probability are studied.

  重点讨论了单一插补的方差估计与多重插补的简化计算以及使用回答概率的单一插补等。

• in this article, the simplified calculation models of steel-pipe bow frame are analyzed in the course of designing, combining with practical engineering.

  结合实际工程，对钢管拱桁架结构在设计过程中的简化模型进行计算分析。

• simplified calculation formula is presented, which provide good references for design and construction.

  提出改进后的简化计算公式，供设计和施工参考。

• based on the softened truss model for reinforced concrete, a simplified calculation method is proposed to simulate the whole loading process of high strength reinforced concrete panels in this paper.

  在钢筋混凝土转动角软化桁架模型的基础上，推导出从应力到应变的简化计算方法来模拟高强钢筋混凝土墻板受力全过程。

• the design schemes, simplified calculation formulas and local constructions of the four reinforcement methods are presented.

  介绍了加固设计方案、简化计算公式和细部构造情况。

• the simplified calculation formula for effective support length of end beam is determined by the code (gb50003-2001) for design of masonry structure.

  《砌体结构设计规范》gb500032001关于梁端有效支承长度采用了简化计算公式。

• the design of the structure, its simplified calculation method, the construction of main joint as well as the methods of test and construction are described.

  结合实际工程，叙述了这种结构的设计、简化计算方法、主要节点构造、试验和施工方法。

• instead of the time consuming numerical computation, a simplified calculation of the maximum field strength is presented for the purpose of dimensioning the three-phase gas insulated cable.

  为确定三相充气管道电缆的尺寸，本文提出利用最大场强的简化计算方法来取代繁复的数值计算。

• based on the analysis of bearing characteristic of the staggered truss system, a simplified calculation model of staggered truss structure under vertical loads or lateral loads is presented.

  通过对交错桁架结构体系受力特点的分析，确定了在竖向荷载和水平荷载作用下交错桁架结构体系的简化计算模型；

• p- restoring force model, simplified calculation methods of ductility coefficient and energy dissipation are given on the basis of integral calculation and parameter analyze for cfrst.

  在数值计算和参数分析的基础上，提出矩形钢管混凝土压弯构件荷载—位移恢复力模型，延性系数和耗能比的简化计算方法及相关计算公式。

• and the plastic sway between layers is calculated by analysis of plastic history and the simplified calculation method.

  层间弹塑性变形是通过弹塑性时程分析和简化计算方法进行的。

• based on the above results the simplified calculation of tube structures has also been discussed, and the equivalent column formula of flange-frame has been presented in this paper.

  在此基础上，本文还论述了简体结构的简化计算，并提出了法向框架的等效柱公式。

• for this reason a simplified calculation method is developed.

  为此，发展了一个简化源项计算方法。

• taking the hybrid ground source heat pump with cooling tower as research object, a simplified calculation model of buried tube heat exchanger is established.

  以配置冷却塔的复合式土壤源热泵为研究对象，建立了地埋管换热器简化计算模型。

• automobile brake efficacy is related to many factors concerning vehicles and roads. all sorts of previous simplified calculation results are far from real situation.

  汽车制动效能与汽车及道路的诸多参数相关，常用的各种简化计算结果与实际情况差异很大。

• with the riding quality evaluation criterions, the simplified calculation of dynamic amplification factor for asphalt pavements and concrete pavements are both gained.

  然后，结合路面行驶质量评价标準，分别提出了沥青路面和水泥混凝土路面的动荷系数简化计算公式。

• instances prove that error didn't exceed 1%. compared with stage-method, simplified calculation can satisfy the needs of engineering completely.

  通过算例证明，采用简化法计算结果与分段法比较，其误差不到1% ，完全可以满足工程要求。

• some simplified calculation methods to the coefficient meet with the highway bridge, but they are probably not suit with the urban wide bridge.

  一些适用于公路桥梁的简化的横向分布系数计算方法对于城市宽桥未必适用。

• the simplified calculation formula form of cracking moment is simple and the analytical results agree well with that of experiments.

  经简化后的开裂弯矩计算公式形式比较简单，计算结果与试验结果基本吻合。

• by analyses, a simplified calculation method of active earth pressure on back of abutment un der earthquake condition has been put forward. calculating results prove the reasonable of this method.

  通过分析，本文提出了地震条件下桥台台背主动土压力简化计算方法，计算结果表明了这一公式的合理性。

• in this paper, a simplified calculation model has been proposed for analyzing the effecting of bending deformation of jet attachment in parallel flows.

  本文提出平行气流中附壁射流弯曲变形的简化计算模型。

• a simplified calculation model of magnetic field from substation busbars is established.

  构建了配电房母线磁场分布计算的简化模型。

• a new simplified calculation model was proposed for evaluating the isolation effect of open trenches.

  提出了影响因子的概念，建立了空沟隔振效果的简化计算模型。

• however use all kind of simplified calculation ways is not easy for most people to master.

  而各种简化计算方法也不容易为大多数人掌握。

• the results show that the values from this simplified calculation formula is consistent to the test data and it can be used to design the spiral structures.

  结果表明，用此简化计算公式计算的结果与试验数据基本一致，可以用于螺旋片导流式气液分离器螺旋结构设计计算。