片语

slow-cooling box慢冷相

slow slag cooling渣缓冷

slow-cooling accelerating crystallization缓冷催化结晶

slow-cooling spheroidizing annealing缓冷法

slow-cooling process缓冷工艺

slow-cooling furnace缓冷炉

slow programmed cooling慢程序冷却

英汉例句

• To subject (glass or metal) to a process of heating and slow cooling in order to toughen and reduce brittleness.

  给(玻璃或金属)加热并使之慢慢冷却以使之变硬并减少易碎性。

• The adoption of the chamfered mould, slow cooling in CC and increasing the edge and corner temperature could effectively suppressed the edge defect of pipeline steel.

  采用倒角结晶器及连铸弱冷工艺、提高轧件边角部温度可以有效抑制管线钢边部缺陷的产生。

• The results show that the quality of the freeze dried liposome frozen at the rapid cooling rate is better than that frozen at the slow cooling rate.

  结果表明，对于脂质体快速冻结后得到的冻干品质量优于慢速冻结。

• With this process the rate of cooling is the controlling factor, rapid cooling from above the critical range results in hard structure, whereas very slow cooling produces the opposite effect.

  热处理时冷却速率是控制要素，从高于临界温度快速冷却导致坚硬的组织结构，而缓慢冷却则产生相反效果。

• As the slow cooling temperature of the steel plate was decreased, the effect of the hydrogen diffusion in the core of steel plate at the same thickness became more and more poor.

  随着钢板缓冷开始温度的降低，同一厚度钢板芯部氢的扩散效果也越来越差。

• The solubility curve for cadmium nitrate tetrahydrate (CNT) has been ditermined. the CNT crystal can be grown by slow cooling solution technique.

  测定了四水硝酸镉（CNT）溶解度曲线，采用降温法培养出CNT单晶。

• By slow cooling plutons? - And what is a pluton?

  慢慢冷却火成巖-什么是火成巖？

• Conclusion: in mouse, slow cooling with seeding is an optimal protocol for ovary tissue cryopreservation, but there is still something left to improve the cryopreservation protocol.

  结论慢速冷冻结合植冰是小鼠卵巢组织冷冻保存比较有效的方案，但是冷冻方案尚需进一步完善。

• At present, slow cooling is the adopted method for long-term storage for HSCs but as a conventional method, it has many disadvantages.

  目前，脐血造血干细胞的低温保存主要采用的是慢速冻存方法，但是这种方法的冻存效果以及冻存技术还有需要提高和完善的地方。

• Using special stainless steel baking roller to ensure the coffee beans can be roasting equally. for its fast heating up and slow cooling down features energy can be saved efficiently.

  烘焙滚筒为特殊不锈钢，以确保加热均匀，积热快，散热慢，可节约能源。

• The work piece can be clad with lagging materials immediately after overlay and adopt slow cooling method on the basis of different principle material and complicated shape of the work piece.

  根据工基体材质的不同情况和工件形状的复杂程序，也可采用堆焊后立即有保温材料包覆，然后缓冷的处理方法。