片语

Bearing Quality Steel滚珠钢

boron bearing microalloyed steel含硼微合金钢

bearing gear steel轴承齿轮钢

9Cr18 bearing stainless steelCr18轴承不锈钢

bearing g steel轴承钢

copper-bearing aging steel含铜时效钢

Al bearing TRIP steel铝基相变诱发塑性钢

ti-bearing stainless steel含钛不锈钢

nitrogen bearing austenite steel含氮奥氏体钢

英汉例句

• In this paper mechanical polishing; Chemical polishing and hydrogen reduction methods used im cleaning bearing steel surface for oxygen determination have been studied.

  本文研究了用机械抛光、化学抛光和氢还原法处理轴承钢表面对测定氧的影响。

• Analyze and discuss the standard of high-carbon chromium bearing steel on the basis of producing experience, analyze problems exsited in the new standard and also propose Suggestions and content.

  根据生产实践，对高碳铬轴承钢标準进行分析和探讨，提出新标準中一些问题的同时，还提出一些建议。

• The bearing steel production is delayed by the submerged nozzle clogging.

  由于生产轴承钢水口的堵塞，严重影响生产的顺利进行。

• And bearing steel double row angular contact bearing.

  以及轴承钢双列角接触轴承。

• The headstand wire drawn machine is a suitable equipment for the production of heavy coil bearing steel wire for high speed cold heading.

  大盘重高速冷镦机用轴承钢丝的生产，用倒立式拉丝机是比较合适的选择。

• Titanium nitride(TiN) hard protective films were fabricated on AISI52100 bearing steel surface employing plasma immersion ion implantation and deposition(PIIID) technique.

  用等离子体浸没离子注入与沉积（PIIID）复合强化新技术在AISI52100轴承钢基体表面成功合成了硬而耐磨的氮化钛薄膜。

• In view of the shorter service period of spring cartridge, new raw material, carburizing bearing steel and new heat-treatment process was used in manufacture of spring cartridge.

  针对弹簧夹头寿命较低现状，提出采用渗碳轴承钢材料及相应的热处理工艺制作弹簧夹头。

• In this paper the annealed structure and its grade of bearing steel with abnormal original structure have been studied.

  本文研究了非正常原始组织的轴承钢，退火后的组织及其评级问题。

• While forging the high-carbon chromium bearing steel by the finish forge press, there still remains the issues that the carbide network can not be crushed with the low qualification rate.

  精锻机锻造高碳铬轴承钢时存在网状碳化物不易破碎、锻件合格率低的问题。

• The simulation of controlled hot rolling process of bearing steel (GCr15) has been realized by use of hot torsion test equipment.

  用热扭转试验机，实现了热变形模拟轴承钢控制轧制工艺。

• The effect of basicity of top slags on oxygen content in steel and desulphurization rate during smelting bearing steel has been analyzed.

  分析了轴承钢冶炼过程中顶渣堿度对钢中氧含量和脱硫率的影响。

• Based on the sequent tracking observation on spalling of GCr15 bearing steel under rolling contact fatigue, an expression for estimating the propagation of subsurface cracks was derived.

  本文在对轴承钢接触疲劳剥落过程进行连续追蹤观测的基础上，推导了次表面裂纹扩展的估算公式。

• The results show that suspension casting can make the temperature field uniform, eliminate macro segregation of c, s and p, and improve the quality of bearing steel ingot.

  结果表明，悬浮浇注能有效地改善轴承钢锭的温度分布，极大地改善钢锭横截面上的碳、硫、磷元素的中心偏析，提高了轴承钢锭的质量。

• This paper analyzes the current situation and technical characteristics of bearing steel smelting at home and abroad.

  分析了国内外轴承钢冶炼的现状和技术特点。

• In installation, the positioning axis of the foundation and the bearing steel cylinder elevation exceed the allowable value of the standard deviation.

  在安装方面上，基础的定位轴线和支承钢柱面标高超过规范允许偏差值。

• The effect of heat treatment process on microstructure and mechanical properties of bearing steel was studied, and the mechanism of strengthening-toughening of the steel was also discussed.

  研究了热处理工艺对渗碳轴承钢组织、力学性能的影响规律，并探讨了强韧化机制。

• Most of these materials, colors look pale, but a dedicated partial bearing steel color is green.

  而这些材料外观颜色大多发白，而专用的轴承钢的颜色是偏绿的。

• The present situation of producing, standard, quality and extend producing licence for bearing steel in China was summarised.

  综述了目前我国轴承钢生产、标準、质量现状和生产许可证发放情况。

• This paper deals mainly with the formulation, processes and microstructure of the diffusion Vanadium-coating with powder on the journal bearing steel of cone bits.

  本文着重研究了牙轮鉆头轴承用钢的粉末渗钒配方、工艺和渗层的组织结构。

• Some views on how to increasing fatigue life of ball bearing steel are presented.

  同时对如何提高轴承钢的疲劳寿命提出了看法。