片语

Sole Bond Strength鞋底剥离强度

bond anchorage strength粘结锚固强度

Interlayer bond strength中层接合强力

bond university strength粘合强度

adhesive bond strength tester粘合强度试验机

Solder Bond Strength焊接结合强度测量

loss of bond strength粘结强度损失

bond d strength粘合强度

Internal bond strength内结合强度

英汉例句

• Based on pullout tests of 48 specimens, interfacial bond strength between CFRP strand anchors and different bonding agents was systematically studied.

  在此基础上，通过48个试件的拉拔试验，在国内首次对碳纤维塑料筋锚桿与多种粘结介质之间的界面粘结强度进行了研究。

• Based on the push-out tests of steel reinforced lightweight concrete specimens, average bond strength and local bond strength are studied by orthogonal experimental design.

  通过正交试验设计，由推出试验研究了型钢轻骨料混凝土的平均粘结强度和局部粘结强度。

• So what we can actually directly compare is the dissociation energy or the bond strength of nitrogen versus hydrogen.

  因此实际上我们可以直接进行比较，对氮分子与氢分子的离解能，或键的强度。

• The test results show that the bond strength is of concrete, but not affected by the length of the steel tube-concrete core interface.

  试验结果表明，混凝土强度、钢管表面状况和混凝土养护条件对粘结强度有显着影响，而界面长度对粘结强度无影响。

• The material had high emissivity, high bond strength and thermal shock resistance. it was a new ceramic material of high efficiency and saving energy.

  这种材料具有高辐射率、高粘结强度、抗热震性能好等特点，是一种高效节能的陶瓷新材料。

• Objective: The key of the success of porcelain-fused-to-metal restoration(PFM) is to obtain better bond strength between metal and porcelain.

  目的：金瓷修复体成功的关键是金属与瓷之间要获得良好的结合强度。

• Objective This study was aimed to analyze the effects of different surface preparation method and different porcelain restoration material on the bond strength of metal bracket to the restoration.

  目的研究瓷表面不同处理方法对金属托槽与瓷修复体的粘接强度及去粘接后瓷面完整性的影响。

• The development of the better technique to characterize the bond strength of film-substrate interfacial is a hot topic that is concerned at large by film researchers.

  开发新的膜—基界面结合强度定量检测技术是目前薄膜技术科研人员普遍关注的热点问题。

• Coating with the underlying bond strength with the matrix on the cleanliness and roughness.

  涂层与基本的结合强度与基体清洁度和粗糙度有关。

• The bond strength between bone and titanium coatings was also measured by push-out test.

  涂层与骨组织之间的结合强度用推出实验进行测量。

• The polymer emulsion can increase flexural strength and bond strength of modified mortar and reduce compression flexure ratio.

  聚合物乳液能提高改性砂浆的抗折强度和粘接强度，降低压折比；

• It could determine the safety factor and bond strength of the anchor cable, then, get dynamic test results of the anchor cable under different geological condition.

  通过试验分析，确定锚索的安全系数及粘结强度，获取在不同地质条件下锚索锚固过程中的动态试验信息。

• The invention relates to the method and the device to detect the bond strength of the coat interface based on the XRD which belongs to the optical detection technology.

  本发明涉及基于XRD的涂层界面结合强度检测方法和装置，特指一种采用XRD检测涂层结结合强度的方法和装置，属于光学检测技术领域。

• Insulating ability and peel bond strength are two important properties for thermal insulating covering.

  保温性能和剥离强力是保温被两个非常重要的性能指标。

• The results show that the adhesive has the characteristics of higher bond strength and better Storage Stability.

  结果表明，该胶粘剂具有较高的粘结强度和优良的贮存性能。

• The results showed refining has no effect on shear bond strength and wet pressing can improve shear bond strength slightly, the increase oft…

  提高打浆度和增大湿压对纸页抗张强度的提高主要是纤维相对结合面积增大的结果。

• Objective: to investigate the shear bond strength of three adhesive systems bonded with ceramic brackets to the porcelain surfaces.

  目的：研究三种不同釉质粘接剂对陶瓷托槽与瓷修复体粘接剪切强度的影响。

• Polyester resin capsules shall be of quality giving sufficient bond strength to comply with requirements for pull tests.

  聚脂树脂膜片应具有好的质量，使其充分粘合，并符合拉拔试验的要求。

• Bending strength, compressive strength, interfacial bond strength and frost-resistance were also studied and analyzed.

  并对其抗压、抗折、新老界面粘结强度及抗冻性等进行了实验研究。

• The bond strength between AFRP belts and concrete was higher than that between steel bars and concrete.

  而纤维带与混凝土之间的粘结性能要强于普通钢筋。

• The key technical problems of the bond strength between the matrix and steel body, the concentricity and diamond segments sealing off from the body are successfully resolved in the studies.

  本研究成功地解决了胎体与钢基体结合强度、同心度及金刚石掉块等关键技术问题。