片语

brake pressure disc制动压盘

brake disk闸盘；煞车圆板

brake back disc制动背盘

front brake disc前制动盘

english Brake Disc碟式剎车盘

rear brake backing disc后闸底板

brake flap制动盘；减速板

brake actuating disc assembly制动器致动盘总成

brake lining disc制动面摩擦片

brake e disc剎车盘

英汉例句

• compared with the brake shoe, brake disc is less than the owners are usually mentioned in the maintenance of matters.

  与制动蹄片对比，制动盘就对比少被车主们在维护平时事项中提及。

• the calculation method of transient temperature field and stress field of a new type brake disc is put forward on the basis of 3dimentional cycle-symmetric finite element model.

  基于三维循环对称有限元模型，提出了机车制动盘制动过程中温度场和应力场的计算方法。

• most owners have been staring at what time to replace the brake shoe, but the deterioration of the brake disc does not pay attention to, for a long time, it will directly affect the safety of braking.

  大都车主们一向盯着什么时分该替换制动蹄片，却对制动盘的日益恶化不予注重，时刻一久，就将直接影响制动安全。

• all brake disc types intended for production are manually placed in a specially designed holder.

  所有预期用于生产的制动圆盘型号都需要手动放置到一个特殊设计的夹头上。

• the feature of macro-profile is analyzed, and the crack initiation and extending mechanism of brake disc is discussed.

  分析了制动盘裂纹剖面的宏观形貌特征，并对制动盘裂纹萌生和扩展机理进行探讨。

• iron brake disc used widely at present with low thermal conductivity, easy hot cracking and low wear resistance needs to be improved.

  目前广泛使用的铸铁剎车盘导热率低、易热裂、耐磨性差，需要加以改进。

• this paper proposes a method to calculate the transient temperature field and stress field of a working brake disc with 3 dimensional cycle symmetric model.

  提出了一种以三维循环对称有限元模型计算制动过程中制动盘温度场和应力场的方法。

• when brake disc wears enough to affect safety in operation or can 't adjust clearance, this is called failure.

  当制动盘磨损到影响安全操作或制动间隙无法调节时，即为失效。

• other brake disc types not listed may only be balanced after a design review and design adaptations, if required. it is recommended to consult the manufacturer in this case.

  其他不在列表中的制动圆盘型号只有在经过设计审阅和设计修改后才能进行平衡。在这种情况下建议要先行与制造商沟通。

• therefore, the paper introduces the process of catia parametric modeling by brake disc modeling, and the relationship between the related documents.

  所以本文以制动盘为例，介绍了catia中参数化建模的过程，及相关文件之间的相互关系。

• in this paper, the material, manufacturing technology and test condition of radiating finned forged steel brake disc are described.

  简要介绍散热片式锻钢制动盘的材料、制造工艺及试验情况。

• brake disc is a very important component in automobile brake system and running quality of which has a direct bearing on driving safety of automobile.

  剎车盘是汽车制动系统的重要组成部分，制动性能的好坏直接关系到车辆的行驶安全。

• the main parts of a disc brake include the brake cylinder, the brake disc and the brake calipers.

  盘式制动器的主要部件包括制动缸、制动盘和制动钳等。

• a typical formula one brake disc weighsabout 1.5 kg (versus 3.0 kg for the similar sized steel discs used in theamerican cart series).

  一个标準的一级方程式剎车片重约1.5千克（与此相对，美国cart系列中使用的钢片在同等体积下重达3.0千克）。

• if any of the measurements exceed the brake disc thickness variation specification, a new brake disc must be installed and the brake disc runout re-checked.

  如果有任何测量值超过制动盘厚度变量规格时，则必须安装新的制动盘并且重新检查制动盘的失圆。

• based on the results, a design procedure for a long life brake disc was established and a new brake disc which was effective in preventing thermal cracks on the braking surface was proposed.

  根据试验和分析结果，确定了长寿命制动盘的设计程序，提出了新的制动盘方案。

• a practical and effective ultrasonic inspection method for detecting internal flaw of brake disc is put forward and the key procedure is to select a proper probe.

  提出运用超声检测的方法检测制动盘内部缺陷是切实可行的，而选择合适探头是超声检测成功的关键。

• driven piston friction plate brake disc will be clamped to the wheel brake.

  活塞带动摩擦片将制动盘夹紧，使车轮制动。

• the brake disc types intended for production are listed in section 7 technical data.

  预期用于生产的制动圆盘型号请见技术数据第七部分。

• firstly, cause impacting deflection of brake disc has been analyzed, and diagnosis rule has been put forward, and by it deflection of brake disc has been diagnosed.

  制动盘偏摆量监测信号经小波分解与重构，有振幅超过规定并由主轴齿轮啮合频率引起的强迫振动弱信号存在。

• we are specialized in manufacturing and exporting brake shoes, brake pads, brake disc rotor & drums.

  专业生产剎车系统配件：剎车蹄，剎车片，剎车盘，剎车毂；主要出口欧洲和北美。

• the utility model is applied to the brake disc spraying and rotating device and has the advantage of high temperature resistance.

  本实 用新型应用于剎车盘喷涂旋转装置，具有耐高温、效果好的优点。

• brake boot detergent:clean spot of brake disc and brake boot go improve braking effect, reduce braking noise and is also suitable removing dirt from spare parts and electrical contact points.

  剎车皮清洁剂：清洁剎车盘及剎车皮之污渍，改善剎车效应，防止剎车响声，同时适用于清洗零件及电器触点污渍。

• meanwhile, the mechanism of braking process, especially the elastic impact between shoulder of brake disc and shoulder of brake housing have also been researched into.

  减小压盘凸肩和壳体凸台间的弹性恢复系数和周向间隙都可以减小制动时的沖击，有效地改善制动平顺性。

• basically the design platform of brake disc is set up.

  基本上建立了制动盘的设计分析平台。

• therefore, it is necessary to study the application of vanadium-titanium vermicular cast iron in ingot mould, glass mold, auto brake drum and brake disc using abundant v-ti iron in china.

  因此，利用我国丰富的钒钛生铁资源，开展钒钛蠕墨铸铁在钢锭模、玻璃模具以及汽车剎车鼓和列车制动盘等方面的应用研究很有必要。

• fatigue crack propagation rate of the forge steel brake disc is studed with a test in the paper.

  该测定参数可用于锻钢制动盘剩余寿命评估。