英语释义

• a butt joint that is welded

片语

butt-weld flange焊法兰

butt groove weld对接坡口焊

plain butt-weld对焊

butt-weld joint对焊接头

butt-weld d对接焊缝

butt seam weld对线焊

butt joint weld对接焊

英汉例句

• body: strong construction assures maximum safety over the recommended pressure and temperature range. both flange and butt weld ends are available.

  阀体：坚固耐用的结构，确保在相应的压力温度等级范围内的安全性。可提供法兰和对焊两种连接方式。

• blind area in the inspection of butt weld joints using tofd technique was studied by theoretical analysis and experiment.

  理论分析与试验验证相结合，研究分析了tofd技术在检测对接焊接接头中的盲区。

• the research focuses on the defect equivalent analytical methods in building steel structure butt weld fusion and the effects of non-crack-type defects on the normal use of butt weld fusion.

  本课题研究了建筑钢结构熔透对接焊缝中缺陷当量的分析方法和非裂纹类缺陷对焊缝正常使用的影响。

• by the analysis and measures above, it improves the test quality of the process piping butt weld effectively.

  通过以上分析和采取的措施，能有效提高工艺管道对接焊缝超声波检测的质量。

• some crack extension probably developed from the unfused section of the butt weld across the thickness of the stiffener during transport and erection.

  有些裂纹可能在运输和安装过程中就从加劲 肋对接焊未熔透处开始发展。

• body– streamlined flow path minimizes pressure drop. butt weld , venturi or flanged ends provide piping alternatives.

  阀体–流线形流道，最大限度减少压降。对焊、喉管或法兰连接端口几种可供选择的连接方式。

• in the long pipeline, because the end surfaces of the welded pipes have the geometrical errors which induce the butt weld defects, the stress corrosion crack will occur .

  在长输管道生产中，由于焊管管端几何形状误差而引起的对接焊缝缺陷是造成应力腐蚀断裂的主要原因之一。

• in this paper, buckling of thin plate due to butt weld is investigated using inherent strain method as an equivalent load.

  提出了基于固有应变对接薄板失稳分析的基本方程。

• the assembly deviation butt weld of has line on the part of the middle, the light is different on the sides of linear.

  组对偏差的对接焊缝其焊缝偏中间区域会出现线条，线条两侧的亮度不同；未焊透的对接焊缝在射线图像里显示为焊缝中间出现黑色的直线；

• notes : 1. , asfor valves in pound unit, connection unit〝f〞is expressed with 〝w〞if butt weld adopted; 〝f〞expressed with〝r〞if metal ring adopted.

  说明：1、对磅级制阀门如采用对接焊连接，连接单元「f」用「w」表示。如采用金属环连接「f」用「r」表示。

• this indicated that the fracture had initiated at the unfused butt weld in the longitudinal stiffener.

  有些裂纹可能在运输和安装过程中就从加劲肋对接焊未熔透处开始发展。

• in this paper, the experiments of static strength and fatigue have been completed on gh2132 butt weld joint at two different temperatures(360℃ and 410℃).

  对gh2132材料对接焊接头进行了两种不同温度（360℃和410℃）下的静载拉伸试验和疲劳试验。

• butt weld ends-schedule of mating pipe defined within parentheses ( ).

  对焊连接端口- 在括号（ ）内定义所配置的管道目录。

• buckling of thin plate due to butt weld was investigated using inherent strain method as an equivalent load.

  提出了基于固有应变对接薄板失稳分析的基本方程。

• reducing long radius butt weld elbows shall be kept to a minimum.

  应尽量少用长径异径对焊弯头。

• while the butt weld lap and the weld reinforcement exist simultaneously, the detecting methods of reinforcements are described.

  叙述了对按焊缝错边与焊缝余高同时存在时的焊缝余高检测法。

• widely used for butt weld joint between carbon steel, alloy steel, non-ferrous pipes, bars and profiled materials or butt weld between heterogenous metals.

  广泛用于碳钢、合金钢、有色金属的管、棒、板、型材之间的对焊或异类金属之间的对焊。

• unless otherwise specified, all pacific valves will be supplied with butt weld ends conforming to ansi b16.25 either fig. 2(b) or 3(b) depending on the nominal pipe wall thickness of the valve wall.

  除非另外指定，所有美国太平洋阀门都配置符合ansib16.25标準的对焊连接端口，并根据阀门壁厚和管道壁厚确定是属于型号2（b）或3（b）。

• this indicated that the fracture had initiated at the unfused butt weld in the longitudinal stiffener.

  研究表明裂纹是从纵向加劲助未熔透的对接焊缝中起始…