英语释义

• creating a butt joint by welding

片语

Butt-welding ends对焊连接

slanting butt seam welding斜对接缝焊

butt seam welding对接滚焊

butt resistance welding machine对焊机

butt resistance welding电阻对焊

butt sefeel welding滚对焊

butt seam welding machine对接滚焊机

英汉例句

• butt welding machine process was introduced. 8031 single chip computer was used in controlling flashing current. hence the flashing butt welding process automation is so achieved.

  本文介绍了对焊机的生产工艺过程，并采用8031单片机对闪光电流控制，从而使闪光对焊工艺实现了自动化．。

• in this paper, on the base of the study of flash butt welding theory, a new intelligent control system of rail flash butt welding is developed.

  本文基于闪光焊接理论研究及钢轨闪光焊接的工艺要求，设计了一种智能控制的钢轨闪光焊焊接系统。

• the welding technology used for preheating flash butt welding was evaluated for workpieces with large welding section.

  针对大截面工件的闪光对焊工艺特点，确定了预热闪光焊的焊接工艺。

• temperature and residual stress fields of industrial pipe discontinuous and continuous butt welding was simulated by abaqus.

  应用大型有限元分析软件abaqus，对工业管道间断焊与连续焊的温度场和残余应力场进行数值模拟。

• according to the plate butt welding of a105 steel, the transverse deformation was real-time measured during welding.

  通过a105钢的平板对接试验，对焊接过程中焊接横向变形进行实时测量。

• bt20 titanium alloy is welded with butt welding on gtaw machine…experiment of plastic deformation is done on press and double heat preservation measure is used during plastic deformation.

  试验采用钨极氩弧焊对接焊形式对bt20钛合金施焊；焊接接头的塑性变形试验在油压机上进行，变形过程中采用了双保温措施。

• present polyethylene, polypropylene, and polybutylene are connected using butt welding technology. a high-quality, high-efficiency plastic pipe connection technology.

  目前聚乙烯、聚丙烯和聚丁烯均采用焊接技术，焊接技术是一种高质量、高效率的塑料管道连接技术。

• a displacement threshold was used to control dc upset butt welding process, and constant pressure and varied pressure tests were carried out on q235 a steel strips.

  采用位移门槛电压控制焊接过程，对q235-a钢进行了变压式和等压式扁钢带直流电阻对焊试验。

• the principle, applications and process of tandem double wire welding for butt welding in shipbuilding were introduced.

  介绍了tandem双丝焊在造船拼板焊接中的原理、应用和工艺。

• according to the actual situation of guangdong province township shipyard, introduction to butt welding and fillet welding procedure approval process and technical standards and the note.

  结合广东省乡镇船厂实际，介绍钢板对接焊和角接焊的焊接工艺认可流程、技术标準和有关注意事项。

• groove preparation, cleaning before welding and butt welding construction of ther tower were showed.

  介绍了坡口加工、焊前清理和上下塔对接施焊进程。

• a reliable way to improve the quality of spiral pipe was the substitution of high frequency butt welding for hf lap welding.

  高频对焊代替高频搭焊是提高中直径螺旋焊管质量的可靠途径。

• it were studied synthetically that the flash butt welding parameters, welding thermal process and microstructure of axisymmetric 45 steel in this paper, .

  本文选择45钢为研究对象，对其轴对称件的闪光对焊焊接工艺、焊接热过程及组织演变与分布进行了综合研究与分析。

• provide welding neck flange butt welding required for the purpose of the right pad with neighboring component.

  提供焊接法兰的脖子上对接焊目的所需要的正确垫与邻近组成部分。

• flash impetus and adopting projection anulus controlling upsetting, steady speed flash and quality of butt welding point is well.

  闪光推进和顶锻采用凸轮控制，闪光速度平稳对接焊口质量好。

• the flash butt welding parameters of axisymmetric 45 steel were determined utilizing the orthogonal test.

  利用正交试验法确定了45钢的闪光对焊轴对称件焊接工艺。

• the parts material, flange and butt welding dimension may selected according to current operating condition or users' requirement to meeting the requirements of various engineering.

  零件材料，法兰和对焊尺寸可根据实际工况或用户要求合理选配，满足各种工程需要。

• the joint deformation of dc upset butt welding was studied by using theory of plastic deformation and rigid-viscosity plastic material model.

  采用塑性变形理论和刚粘塑性材料模型研究了直流电阻对焊接头的塑性变形。

• the respective feasible and cost- efficient size ranges for tubes produced by ultrasonic lap welding and tig butt welding are suggested by means o…

  通过对铝塑复合管的搭接式超声波焊接和对接式tig焊接比较，说明了两种方式各自合理经济的管材生产尺寸范围。

• simulation of dc flash butt welding by coupling with electricity, heat, and mechanics will be instrumental in designing and drawing out technical specification.

  同时，对直流电阻对焊过程进行电、热、力耦合模拟也将会对焊接过程的认识、合理设计控制措施和制定合理的工艺规范有着重要意义。