英语释义

• a chronic disorder that occurs in tropical and nontropical forms and in both children and adults; nutrients are not absorbed; symptoms include foul-smelling diarrhea and emaciation

片语

nontropical sprue性腹泻

sprue hole竖浇道孔

sprue cutter浇冒口切断机

filler opening注入口；进油口；填充孔

Tropical Sprue热带性口炎性腹泻

molten slag熔渣；熔化熔渣

Sprue Spreader分流器

sprue runner流槽

nontropic sprue非热带性脂肪泻

sprue bushing浇口衬瓦；[塑料] 注口衬套

Sprue tip导流块

英汉例句

• to avoid this undesirable feature, an arrangement for pulling the sprue should always be incorporated in the design.

  为了避免这种不希望看到的现象，一个主流道拉料机构总应在设计中加以考虑。

• i need to double check the sprue radius, the location of the ko hole, and the thread type of ejector rod.

  我得检查一下它的唧嘴大小，顶棍孔位置以及顶桿螺牙类型是否正确。

• the polymer material enters via a centrally positioned sprue bush, passes through the flow-way and leaves the unit via a secondary nozzle in line with the impression.

  聚合体材料通过一个中心位置的浇口套进入，经过流道且经过与型腔相符的二级喷嘴离开这个单元。

• influence of several parameters, including pattern material, sample size, pouring temperature, coating thickness, sprue height and vacuum rate, on the fluidity of az91 mg alloy by epc-v is studied.

  研究了镁合金负压消失模铸造中，模样材料、试样尺寸、浇注温度、涂料厚度、直浇道高度以及真空度等因素对az91镁合金流动性的影响。

• step motors drive sprue guns to realize the accurate positioning of the eccentric bunghole automatically.

  步进电机带动加注枪，实现偏心桶口的自动定位。

• with my measuring equipment, i checked the sprue and runner.

  藉由我的测定设备，我检查溶碴和转轮。

• here is the cast faceplate with the gate and sprue still attached.

  以下是与门面板和浇道演员仍然重视。

• the sprue with square or hexagonal section is superior to the sprue with round section for technological yield of the casting by theoretical analysis and actual verification.

  通过理论分析比较并通过生产实践得出，对于铸件工艺出品率，正方形或正六边形截面的直浇道优于圆形截面的直浇道。

• after mold opening, this pin will function as an ejector pin and ejects the sprue from a sprue bush. also it releases gas contained in molten plastic.

  开模以后，拉料桿像顶针一样将浇注凝料从浇口套内顶出，同时也释放融料中的气体。

• they may also be placed at far surface of a mold, away from a riser or sprue .

  它们也可能被置于远远表面的模具，使之远离，从冒口或浇道。

• conclusion in sprue designing of dental high frequency casting, the use of reservoir and non-use of reservoir have no significant different effect on casting quality.

  结论：储金球在齿科高频铸造的铸道设计中，使用储金球和不使用储金球，对铸件质量的影响无明显差别。

• attention was paid on how to lower the production costs in the processing of thermosetting plastics, which covered the fiber orientation, removal of burr and sprue runner material loss.

  由于纤维取向、去除飞边和流道料损失等是热固性塑料加工中影响成本的主要问题，故着重介绍了降低上述费用的办法。

• the function of the heat flow system is to sent materials to sprue gate.

  热流系统的作用就是把材料送到模内的每一浇口。

• the design manner of cooling system of cd injection mold was mainly introduced, and the cooling water channel of moving plate, stationary plate, sprue and punch etc were detailed.

  介绍了光盘注射模冷却系统的设计方法，以及动镜面、定镜面、浇口与凸模的冷却水路等。

• make analyses of selecting nozzle and designing sprue runner and gate and etc.

  对喷嘴选择，直、横浇道及浇口设计等进行了分析。

• because there are no effective methods to measure molten iron level in the sprue cup, at present most of pouring systems work in manual mode.

  长期以来，由于没有有效的方法测量浇口杯内的铁水液位，浇注一般都是用人工控制。

• since some components such as ejector pin, locating ring , sprue bush , water junctions and springs are not included in the mould base, these components are purchased independently.

  由于某些原件诸如顶针、定位环、浇口套、弹簧等是不包含在模架里的，因此需要单独购买。

• during this time, the screw moves back while turning to carry out a new proportioning by bringing material melted to the front of the sprue tube.

  在这段时间里，螺桿回复到原位，同时旋转以实现下一环节的动作，即将熔化的材料带入进胶管前端。

• this is particularly desirable when a central sprue puffier is used.

  这在使用中心主流道拉料桿的时候尤为必要。

• malabsorption can be caused by infection, surgery, certain drugs, heavy alcohol use, and digestive disorders such as celiac sprue and crohn's disease.

  感染、手术、某些药物、酗酒以及诸如口炎性腹泻和克罗恩病此类的消化功能紊乱都可能引起消化不良。

• the sprue sections influence the technological yield of small castings in investment casting.

  对于小型熔模铸件，直浇道的截面形状将影响其工艺出品率。

• objective to evaluate the effect of reservoir on casting quality in sprue design of dental high frequency casting.

  目的：探讨储金球在齿科高频铸造的铸道设计中对铸件质量的影响。