片语

bending radius of cable电缆弯曲半径

BENDING RADIUS DYNAMC动态弯曲半径

allowable bending radius允许弯曲半径

bending g radius转弯半径

BENDING RADIUS STATIC静态弯曲半径

Permissible Bending Radius允许弯曲半径

minimum static bending radius最小静态弯曲半径

radius of turn回转半径，旋转半径；转弯半径

MBR Minimum Bending Radius最小弯曲半径

英汉例句

• so the wavelength of tfbg can be used to define the bending radius of simple supported beam.

  因此可以用tfbg波长来定义简支梁的弯曲半径。

• characteristics: high flexibility of small bending radius corrosion resistance strong halogen specifications b: rib loose, so that the hose can withstand greater pressure, and maintain flexibility.

  特性：柔韧性高弯曲半径小耐腐蚀力强不含卤素规格b：肋宽大，使软管能承受更大压力，并保持柔韧性。

• the main function of the system is in-plane bending radius estimation, forming limit estimation and forming process optimization.

  本系统的主要功能有：面内弯曲半径的预测；成形极限的预测；成形工艺的优化。

• when bending needed, better to adopt larger trend of bending radius so as to lower the friction between cable and casing.

  在需要弯曲时，应尽量取弯曲半径大的走向，以降低钢丝绳和护套管间的摩擦力。

• the minimal bending radius is 6 times the thickness of electric heating cable.

  安装电热带最小弯曲半径为其厚度6倍。

• at last, the formulation of allowable minimum bending radius limiting the change of the tube-wall thickness is derived, and proved to be of practical value.

  推导出限制弯管壁厚变化量的许用最小弯曲半径公式，经试验验证具有一定的实用价值。

• in order to adjust the bending angle, the t type slide seat and bending press plate were used. the adjusting of bending radius was implemented by replacing the adjusting axis of bending radius.

  模具采用t形滑座与弯曲角两边的压板调节，从而达到在一定范围内调节弯曲角度的目的，弯曲半径的调节主要是通过更换弯曲半径的调节轴来实现。

• the bending radius of cable: non armoured cable, should not be less than 6 times.

  电缆的允许弯曲半径：无铠装电缆，不小于电缆直径的6倍；

• the characteristics of this sensor is analysed. it is concluded that for a certain refractive index range, the index of fibre core, the radius of core and bending radius need to be optimized.

  详细分析了这种传感器的特性，指出对于特定的外界折射率范围，需设计纤芯折射率、光纤半径、弯曲半径三个参量的最佳组合。