英语释义

• solder together by using hard solder with a high melting point

片语

braze cream钎料膏

braze coating钎涂

sandwich braze[机]

braze fixture[机]

braze flaw钎焊缺陷

braze braze长征才刚刚开始

braze interface硬钎焊面

braze welding钎焊；硬钎焊；钎焊接；[机] 硬焊

ti braze钛钎料

英汉例句

• ultrasonic imaging nondestructive testing technology could be used effectively in inspecting and controlling braze quality of switch electric contact.

  针对开关电触头钎焊质量难以检测的问题，采用超声成像无损检测技术能够有效地检测并控制焊接质量。

• the braze and interfacial microstructures were characterized by optical microscopy, scanning electron microscopy, and energy dispersive spectroscopy.

  在钎焊和界面微观结构的特点是光学显微镜，扫描电子显微镜和能谱。

• the method is used to estimate the viscoelastic plastic unified constitutive model「s parameters of braze alloys experiments in different constant strain rate.

  对铜合金在室温下不同加载速率的试验曲线进行参数适配，表明本方法的合理性与正确性。

• it is very effective to use the scanning electron beam (eb) heating to braze the stainless steel structural part with capillary-to-plate joints.

  用电子束扫描加热的方法对具有毛细管板接头的不锈钢结构件进行钎焊是非常有效的。

• bonding pressure imposition can be used as one of the methods modifying braze metal.

  加压可以作为一种改性钎缝金属的方式。

• the technological method of the mediumˉfrequency induction braze welding with heating of the rotor copper bar and end ring for the motor is described in this paper.

  本文介绍了发电机转子铜条与端环中频感应加热钎焊的工艺方法。

• melting point is about 880℃. gas welding carbon arc welding of brass, also braze welding of copper, steel cast iron.

  熔点880℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁。

• it」s also superior for braze welding of steel.

  这对钢的黄铜焊接也是较优的。

• high quality aluminium welding will be the key factors in future production. the ability successfully to braze aluminium is not so much difficult as arc welding.

  高质量的铝焊接是未来汽车生产的关键技术之一，铝钎焊的可靠性优于弧焊。

• the copper-phosphorus filler metals are suitable to braze copper, brasses but they can not be suitable to braze ferrous.

  铜磷钎料适宜于钎焊铜及黄铜墻铁壁，但是不适宜钎焊黑色金属。

• melting point is about 905℃. gas welding carbon arc welding of brass, also braze welding of copper, steel cast iron.

  熔点约905℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁。

• reliability experiment was shown that braze welding quality could be known exactly by ultrasonic inspection when proper device, parameter and evaluation method were selected.

  可靠性验证结果表明，选择合适的仪器设备及检测参数，采用正确的评定方法，超声波所测结果能较準确的反映零件的钎焊质量。

• the main reason for failure is the defect that caused by braze welding and component deflection of metallographical structure.

  钎焊形成的缺陷和钎缝金相组织成分偏析是导致疲劳裂纹产生的主要原因。

• the key technology of radiator manufacture by cup ro braze is not necessary to use flux, kupper solder and annealing resistance mate rial.

  铜硬钎焊散热器制造工艺技术的核心是无焊剂、无铅钎焊合金以及抗退火材料。

• the principle of wavelet transform de noise and it's application in ultrasonic image testing of electric contact braze quality inspection was introduced in this paper.

  介绍了小波变换降噪的原理及其在低压开关触头钎焊质量的超声成像检测中的应用。

• the results indicate that the system has high precision, efficency, reliability and cost performance and the strategy is feasible. this research is suitable for testing electric contact braze defect.

  试验结果表明，该系统检测效率高、精度高、可靠性高、性能价格比高，检测策略切实可行，尤其适应于电触头钎焊缺陷的检测。

• this article deals mainly with a technology of vacuum braze of aluminium and its alloys without agents of fusion, which develops in recent years.

  本文着重介绍了近期发展起来的铝及铝合金的无熔剂钎焊—真空钎焊技术。

• according to the technology and configuration of the vacuum braze welding metal honeycomb parts, the technique of ultrasonic inspection for them was studied.

  针对金属蜂窝真空钎焊件的工艺及结构特点，探讨了利用超声波法对其质量进行检测的可行性和可靠性。

• the technology of developing quality and strong pick is found by researching the hard metal alloy, pick-body material, weld gap, technique of braze welding and heat treatment.

  通过对硬质合金、截齿体材质、焊缝间隙、钎焊及热处理工艺的研究，寻找出了研制优质强力截齿的技术途径。

• marc software was used to simulate the temperature and stress fields of laser beam braze welding process of beryllium ring.

  采用marc软件对铍环激光束钎焊过程的温度场和应力场进行了有限元分析。

• the braze alloy evaluated was also found to degrade fatigue properties under certain conditions of test.

  剎车合金的评价还发现，在一定条件下分解疲劳特性试验。

• the fixing and sealing may choose among parallel - seam welding, braze welding, glass - melting - sealing and resin binding.

  封盖可选择平行缝焊、钎焊、玻璃熔封或树脂粘结。

• bulk shielding high-temperature braze and can be directly welded with shielded substance.

  整体结构、高温钎焊、可以直接与屏蔽体电焊焊接。

• it is pointed out that braze welding is one of the most important joining methods in the ceramic-metal manufacturing technology.

  指出在陶瓷-金属挺柱的制造技术中，钎焊连接是陶瓷-金属复合挺柱最为重要的连接方法。

• the method and technology of oxyacetylene flame braze welding for main cable wrapping at shantou bay bridge were introduced, and the difficulties of the welding were analyzed.

  介绍汕头海湾大桥主缆缠丝所采用的氧- 乙炔火焰钎接焊方法及其工艺，并对主缆缠丝焊接的难点进行了分析。

• nickel- based braze welding powder was produced by atomized water cooling. impurity source, influence of impurity element on braze welding property, control of impurity pollution etc.

  对气喷水冷法生产镍基钎焊粉末的杂质来源、杂质元素对钎焊性能的影响以及怎样控制杂质污染等问题进行了分析。