英语释义

• a hand tool consisting of two rules that are hinged together so you can draw or measure angles of any size

• cut a bevel on; shape to a bevel;

  "bevel the surface"

• two surfaces meeting at an angle different from 90 degrees

片语

bevel angle边缘斜截角；坡口面角度

Outer Bevel外斜角

bevel gearing[机] 锥齿轮，锥形齿轮；伞齿轮

bevel protractor斜量角器

bevel welding斜角焊

bevel gears圆锥齿轮机构；扇形齿轮；锥齿轮（bevel gear的复数）

bevel gauge测角器

bevel width倒角宽度

spiral bevel gear[机] 弧齿锥齿轮；[机] 螺旋伞齿轮

bevel wheel斜齿轮；伞齿轮；斜摩擦轮

bevel gear[机] 锥齿轮，锥形齿轮；伞齿轮

bevel edge倒角；斜边；倒角边

straight bevel gear[机] 直齿锥齿轮；[机] 直齿伞齿轮

bevel gear drive[机] 伞齿轮传动；[机] 锥齿轮传动

英汉例句

• top view of bevel headed, hexagonal head set screw. selection box represents thread diameter.

  斜切六角螺钉的俯视图。选择框代表螺纹直径。

• straight bevel gears are widely used in automobiles, motorcycles and engineering machines, and the mainly means for their mass produce is precision forging.

  直齿圆锥齿轮在汽车、摩托车以及工程机械中都有广泛的应用，其大批量生产的主要方法是精锻。

• bevel / emboss —i’ve used this to double-over the drop shadow highlight and give it even more of an embossed feel.

  斜面和浮雕——使用这个样式是为了加重投影的高光并且使得文字更加有浮雕效果。

• draw a rounded rectangle on the opposite side. add inner glow and bevel and emboss.

  上绘制一个圆角矩形对面。添加内发光和斜面和浮雕。

• all valves can be furnished with handwheels, chainwheels and bevel gear handwheels and chainwheels.

  所有阀门都可以配置手轮、链轮和锥齿轮手轮和链轮。

• beveled-entry driveway. bevel dimensions can be specified.

  入口倾斜的车道可指定倾斜的尺寸。

• add bevel and emboss and gradient overlay.

  添加斜面和浮雕和渐变叠加。

• in order to improve the dimensional accuracy and surface roughness of direct rapid metal tooling(drmt), a laser bevel cutting technique for drmt was proposed.

  为提高直接快速制造金属模具的尺寸精度与表面光洁度，提出了面向金属模具快速制造的激光倾斜切割光整工艺。

• his last little touch, as he planed the top edge of the front, was to bevel it slightly, front to back, so that the inward taper perfected the fit.

  最后的工序——一道很小的工序——是打削抽屉前端的上沿，把外沿的直角削成斜面，这样一来，一切就都完美了。

• draw a rounded rectangle on lower left of the camera. add inner glow and bevel and emboss. add camera name inside the rounded rectangle.

  在较低的相机留下了一个圆角矩形。添加内发光和斜面和浮雕。相机内部添加圆角矩形的名称。

• straight bevel gears used in car differential have strict requirements for dimensional precision and quality, it is difficult to form accurately them by the traditional forging techniques.

  轿车上的直齿圆锥齿轮尺寸精度与产品质量要求很高，难以采用常规的塑性加工技术成形。

• again, draw smaller circle shape. add bevel and emboss and gradient overlay.

  同样，画小圆圈形状。添加斜面和浮雕和渐变叠加。

• duplicate shape we have just created. remove all layer styles used. set fill layer to 0% then add layer style bevel and emboss.

  重复的形状我们刚刚创建的。删除所有图层样式使用。填充层设置为0%，然后添加图层样式斜面和浮雕。

• paint the tooth flank of the big bevel gear with a thin and equal red lead coat.

  即在大锥齿轮的齿面上涂一层薄而均匀的红铅油，然后转动齿轮数圈。

• a variety of actuator options are available including handwheels, chainwheels, bevel gears and cylinders. a full complement of accessories are also offered.

  有各种各样的执行器可供选择，包括手轮，链轮，锥齿轮和缸体。还可以提供完整系列的附件。

• on the milestone all the keys are little flat squares, unlike the g1 where each key has a gap between it and a bevel to each button.

  在milestone上，所有的键都是小平正方形，不像g1那样，每个键之间还有一个空隙，每个键相对的地方还有一个斜角。

• now, we are going to add a glass effect to the copy text layer (the text layer on the top), so double click it, and add a bevel and emboss effect.

  现在，我们要复制文本层（在顶部的文本层）添加玻璃效果，所以双击它，并添加斜面和浮雕效果。

• bevel and emboss layer styles add 3d effect on our shape.

  倾斜和浮雕花纹层风格添加3d影响我们的形状。

• after that, select bevel and emboss and just follow the image below.

  在此之后，选择斜面和浮雕，只是按照以下的形象。

• at high gearing speed the combined stresses of centrifugal load and resonance vibration at the notches are the main cause for the catastrophic failure of the bevel gear.

  锥齿轮在高转速下，在槽底的离心应力和振动应力的组合应力是引起齿轮破坏的主要原因。

• bevel gear actuators provide vertical mounting of the handwheel or chainwheel, or can be used where space limitations prohibit the use of a standard handwheel or chainwheel.

  锥齿轮执行器提供手轮或链轮的垂直安装方式，或者用于由于空间限制无法使用标準手轮或链轮的应用环境。