英语释义

1. a transformation product in solid steel developed from austenite at temperatures intermediate between those where pearlite and martensite form

片语

intermediate bainite中间贝氏体

Bainite Colony贝氏体团

grain bainite粒状贝氏体

bainite quenching贝氏体淬火

bainite range贝氏体区域

austenite bainite奥

Bainite rail贝氏体钢轨

bainite steels贝氏体钢的

bainite cast贝氏体

upper bainite上贝茵体，[机] 上贝氏体

英汉例句

• through the usage of the balls of ball-mill the reliability and superiority of the new pattern bainite balls in respects of chemical components, microstructure, heat treatment have been proved.

  通过球磨机磨球的实际使用情况，从化学成分、金相组织及热处理等方面论证了新型贝氏体磨球在实际应用中的可靠性和优越性。

• the lower dislocation density in bainite is unfavourable for the aggregation and coarsening of carbides.

  贝氏体中位错密度较低，不利于合金碳化物的聚集粗化。

• the lath of bainite deformed at 950 ℃ were larger in length and width than deformed at 850 ℃.

  含铌钢在950℃变形时贝氏体板条长度和宽度比850℃变形时大。

• in the wider cooling speed range, b/m duplex microstructure is obtained and bainite varied states are found in this microstructure.

  在较宽的冷却速度范围内可得到b／m复相组织，并且在组织中发现贝氏体的变异形态。

• the results show that both the slow cooling rate to control ferrite transformation and the rapid cooling rate to control bainite transformation affect the microstructure of trip steel obviously.

  结果表明，热变形后控制铁素体相变的慢速冷却的速度及控制贝氏体相变的快速冷却的速度对最终组织的组成影响较大；

• when the strength being equal, it has higher, toughness and hardenability of inter-phase precipitation in comparison with low carbon bainite steel.

  与低碳贝氏体钢比较，在相同强度下有更高的韧性与低的相间沉淀临界冷速。

• this paper introduces the contrast test of wear resistance of hot rolled low - carbon high strength bainite steel plate to ordinary steel plate on qlk800.32 bucket wheel reclaimer.

  本文介绍了热轧低碳贝氏体高强钢板在qlk800．32型斗轮取料机上与普碳钢板进行耐磨性对比工业试验的情况。

• the high stress impact wear behaviors of bainite steel containing silicon with different microstructure were studied.

  研究了中碳含硅贝氏体钢不同组织结构对高应力沖击磨损行为的影响。

• the decomposition and transformation of the retained austenite in bainite differ from that in martensite .

  贝氏体中的残余奥氏体分解和转变的行为与马氏体中的不同。

• a new non-quenching and tempering steel with granular bainite has been developed by proper microalloying and optimized process of steel-making and rolling.

  采用合适的合金化设计方案、优化冶炼和轧制工艺，研制了一种组织为粒状贝氏体的非调质钢。

• features and classification of bainite transition was described in detail.

  详细介绍了贝氏体相变的特征及其分类。

• the test indicates that contact fatigue life and wear resistance of surface quenched casting steels and bainite quenched spherical cast iron are increased largely.

  试验表明：经过表面淬火的铸钢和经过贝氏体淬火的球墨铸铁，其接触疲劳寿命和耐磨性大幅度提高。

• the results show that, in the situation without bainite transformation the degradation of memory behaviour of cu-zn-al alloy after aging can be improved by re-training.

  结果表明，在未发生贝氏体转变的情况下，时效所导致的记忆性能降低，可以通过重新训练予以改善。

• observations showed that the micro-structure of the steel after forging or high temperature rolling was composed of low-carbon martensite, a little part of bainite and residual austenite.

  微观组织观察表明，在锻造或高温轧制状态下获得了以低碳马氏体为主，含少量贝氏体和残余奥氏体的复合组织。

• it mainly introduces the production processes of alloy structural steel welding wires of bainite and martensite and stainless steel welding wires of ferrite, martensite and austenite.

  重点介绍了按金相组织分类的贝氏体、马氏体类合金结构钢和铁素体、马氏体、奥氏体类不锈钢合金焊丝的生产工艺。

• the microstructure, properties and wear resistance of carbide-free bainite wear-resistant casting steel were investigated.

  研究了无碳化物贝氏体耐磨铸钢材料的组织、力学性能和耐磨性能。

• the article mainly introduces the application of air- cooling bainite steel at heavy truck front axes and discusses some factors affecting strength and toughness.

  本文主要介绍了空冷贝氏体钢在重型汽车前轴上的应用研究，探讨了影响强度与韧度的一些因素。

• the results show that p/m valve seats using this technology has high density and high carbon content , and their microstructure are martensite , bainite and network carbide.

  结果表明，采用该工艺可获得高密度、高碳含量、具有马氏体、贝氏体和网状碳化物组织的粉末冶金气门座。

• there is a large landing has a grinder, a large vertical lathe, cnc lathe, bainite isothermal quenching heat treatment production line and other advanced production equipment.

  拥有有大型落地磨床、大型立式车床、数控车床、贝氏体等温淬火热处理生产线等先进生产设备。

• in general, the microstructure of weld metal of the low carbon and low alloy steels consists of pre eutectoid ferrite, acicular ferrite, side plate ferrite and some granular bainite and martensite.

  低碳低合金钢焊缝金属的显微组织基本上包括先共析铁素体、针状铁素体、侧板条铁素体、少量的粒状贝氏体和马氏体。

• the results show that polygonal ferrite, granular bainite and larger amount of stabilized retained austenite can be obtained after hot rolling.

  结果表明，热轧后能够获得多边形铁素体、粒状贝氏体和大量稳定的残留奥氏体组织。